A Hardware-Efficient Hybrid Beamforming Solution for mmWave MIMO Systems

12/12/2018
by   Ming Li, et al.
0

In millimeter wave (mmWave) communication systems, existing hybrid beamforming solutions generally require a large number of high-resolution phase shifters (PSs) to realize analog beamformers, which still suffer from high hardware complexity and power consumption. Targeting at this problem, this article introduces a novel hardware-efficient hybrid precoding/combining architecture, which only employs a limited number of simple phase over-samplers (POSs) and a switch (SW) network to achieve maximum hardware efficiency while maintaining satisfactory spectral efficiency performance. The POS can be realized by a simple circuit and simultaneously outputs several parallel signals with different phases. With the aid of a simple switch network, the analog precoder/combiner is implemented by feeding the signals with appropriate phases to antenna arrays or RF chains. We analyze the design challenges of this POS-SW-based hybrid beamforming architecture and present potential solutions to the fundamental issues, especially the precoder/combiner design and the channel estimation strategy. Simulation results demonstrate that this hardware-efficient structure can achieve comparable spectral efficiency but much higher energy efficiency than that of the traditional structures.

READ FULL TEXT

Please sign up or login with your details

Forgot password? Click here to reset